Plywood and panel manufacturer, Yamunanagar, Haryana

Flat by construction.

Calibrated plywood, blockboard and film-faced shuttering panels for furniture makers, modular kitchens and construction — peeled, pressed and graded in our own yard since 1987.

Get the price list Browse products

5-layer panel, 19 mm, exploded view

Assembled Exploded

Drag the slider — every second layer runs cross-grain. That is why the panel stays flat.

IS:303 / IS:710BIS grades, batch-stamped

4–25 mmthicknesses in 8 × 4 ft sheets

±0.3 mmcalibrated thickness tolerance

E1low-emission adhesive class

Products

Six panels, one standard. Every sheet is calibrated, graded and edge-sealed before it leaves the yard.

Film-faced shuttering ply

For concrete formwork. Phenolic film on both faces, sealed edges, 20 to 25 reuses per panel.

12 / 16 / 19 / 25 mm, 8 × 4 ft

Modular kitchen with plywood cabinets in natural oak tone

BWR boiling-water-proof

Kitchens, bathrooms, monsoon exteriors. Survives 72 hours in boiling water.

6–19 mm, IS:710

Close-up of the laminated edge of a plywood board

MR moisture-resistant

The furniture industry's workhorse. Calibrated, sanded, ready for laminate.

4–19 mm, IS:303

Sculptural chair made from curved bent plywood

Flexible ply

Bends along one axis for curved cabinets, columns and reception desks.

5 / 8 mm, bend radius 250 mm

Built-in wardrobe with flush plywood doors in a bedroom

Blockboard

Stiff, light, screw-holding. The right core for doors, partitions and shutters.

12–25 mm, gurjan or pine

Decorative plywood panel with teak veneer face

Decorative veneer-faced

Teak, walnut and oak veneers over a stable plywood core, lacquer-ready.

4 / 6 / 9 mm, 8 × 4 ft

Three generations in the yard

Vriksha started in 1987 with one peeling lathe and a rented shed. Today it is four buildings on fourteen acres — still family-run, still signed by hand.

The first Vriksha panel was pressed for a school desk in Yamunanagar town. The lathe is retired now, but the habit stuck: every batch is still graded by a person who signs the record. We buy logs from plantations we know, peel and dry them ourselves, and press, calibrate and dispatch from the same yard — so nothing about a sheet is a mystery by the time it reaches your workshop.

A panel carries the name of the person who graded it.

1987founded with one peeling lathe and a rented shed
2nd genstill family-run, on the same fourteen acres
Hand-gradeda person signs the record of every batch

A craftsman checking a plywood panel with a hand plane and caliper in the grading shed — Grading shed, Building 1 — every sheet is hand-graded.

2.4Msheets pressed a year

340+regular buyers across North India

98.6%of batches pass the first test

48 hrdispatch on stocked grades

Why plywood stays flat

Solid wood moves. Plywood is engineered so the movement cancels itself out.

Solid timber moves across the grain — roughly a millimetre for every hundred millimetres, for each percent of moisture it gains or loses. Along the grain, it barely moves at all. Turn every second layer ninety degrees, and the movement of one layer cancels the movement of its neighbours. That is the whole trick, and it is why builders trust a 19 mm panel over a 25 mm plank.

Wood moves across the grainRoughly 1 mm per 100 mm per 1% moisture change, across the grain. Along it, almost nothing.
Every second layer runs cross-grainCross-bands lock their neighbours in both directions, so the panel cannot cup, twist or warp.
The bond is the barrierPhenol-formaldehyde resin, hot-pressed at 140 °C, keeps moisture out of the core for decades.

Cross-sections under the same moisture change.

How a sheet is made

Five steps, one yard, no shortcuts. From log to calibrated sheet in about four days.

01
Peel
Selected logs are rotary-peeled into continuous veneer sheets, 1.2 to 3 mm thick.
02
Dry
Veneer is kiln-dried to a controlled 8 to 10 percent moisture before it goes near a press.
03
Lay up
Sheets are stacked with every second layer cross-grained, then bonded with phenolic resin.
04
Press
Hot-pressed at 140 °C under hydraulic pressure — the bond that survives boiling water.
05
Calibrate and grade
Sanded to ±0.3 mm, graded by hand, edge-sealed and batch-stamped for dispatch.

A press operator feeding veneer into a hydraulic hot press at the Vriksha factory — Hot presses, Building 2 — 140 °C, 12 kg/cm², forty minutes a cycle.

Tested before it ships

Every batch is tested in our own lab. The record ships with the invoice.

We run our own laboratory on the yard, and we test every batch — not a sample from the first pallet. If a batch fails a single check, it does not ship; it goes back to the press.

A panel is only as honest as its last test.

72-hour boil test on every BWR and marine batch
IS:303 and IS:710 grading, batch-stamped
Formaldehyde emission class E1, third-party verified
Termite and borer treatment on request, per IS:401
Calibrated sanding to ±0.3 mm on every sheet

Batch 2261, 19 mm BWR, 240 sheets

Boil test, 72 hrNo delaminationPass
Moisture content9.4 % (limit 8–12 %)Pass
Thickness, 5 points18.8–19.1 mmPass
Emission classE1Pass
Glue shear strength1.8 N/mm² (min 1.0)Pass

Every batch ships with its test record and IS grade stamp.

A technician testing a plywood sample in a universal testing machine at the Vriksha laboratory — The lab, Building 3 — boil tanks, shear tester and the moisture oven.

Grown, not taken

Every log we peel comes from a plantation, not a natural forest.

Our timber is eucalyptus and poplar from managed plantations within 200 km of the yard, grown on a replant-for-every-harvest cycle. Fast-growing, straight-grained, and honest about where it comes from — the same standard we ask of every batch we press.

Plantation timber onlyEucalyptus and poplar from managed plantations, never natural forest.
One-for-one replantingEvery hectare we harvest is replanted in the same season, on the same land.
Cleaner pressingE1-class adhesives and a biomass-fired veneer dryer cut the press line's emissions.

Rows of tall eucalyptus trees in a misty plantation — Source plantations, Yamunanagar district.

Film-faced plywood formwork clamped for a concrete wall pour on a construction site

Film-faced shuttering ply, pour 21 of 24 — edges still sealed, face still smooth. On site, with a customer

Where our panels go

Furniture and wardrobesMR and blockboard cores

Modular kitchensBWR, steam and splash proof

Concrete shutteringFilm-faced, 20–25 reuses

Interior fit-outDecorative veneer faces

Vehicle bodiesLight, stiff, rattle-free panels

PackagingPly boxes and crates

In use

A few places our panels ended up last year.

A premium interior with floor-to-ceiling oak veneer plywood paneling and built-in shelving — A residence in Gurugram — walnut veneer-faced ply, floor to ceiling.

Close-up of hand-cut dovetail joinery in a plywood cabinet — A Bengaluru workshop — dovetails in 19 mm MR, no hardware.

Stacks of cut logs and drying veneer flitches in the timber yard — The yard in March — veneer flitches drying before lay-up.

A truck being loaded with wrapped plywood bundles at the dispatch bay at dawn — Dispatch bay, 6:40 am — 240 sheets out to a kitchen maker in Delhi.

What buyers say

Unedited, from the people who press our panels into service.

We have built eleven kitchens on Vriksha BWR this year. Not one call-back for a swollen edge.

Rohit KulkarniModular kitchen manufacturer, Pune

The calibration is real. Our CNC-nested parts fit the first time, every time.

Sara D'souzaFurniture OEM, Bengaluru

Twenty-two pours on one set of film-faced panels. The maths still surprises me.

Arif MohammedCivil contractor, Lucknow

Common questions

The six things every new buyer asks, answered straight.

BWR boiling-water-proof, 16 or 19 mm. It survives 72 hours in boiling water, so steam, splashes and monsoon humidity are not a conversation.

One sheet if you collect it from the yard. For delivery, half a pallet — about 25 sheets — is the practical minimum, and full-truck quantities get the best rate.

Yes. Our panel saw cuts to size at ±1 mm, and edge-banding is available on 19 mm and above. Cut sizes dispatch within 48 hours.

A sample kit of all six products, A4 size, ships free to any business address in India. Send the requirement form below and mention "sample kit".

Stocked grades and thicknesses dispatch within 48 hours of payment. Decorative veneers and special builds take 5 to 7 working days.

Delhi NCR, Punjab, Uttar Pradesh, Rajasthan and Himachal are daily routes. The rest of India goes by empanelled transporters, typically 3 to 5 days.

Sell Vriksha in your city

We are appointing dealers in towns that still buy plywood on trust. You get the price list, stocking support, a sample kit for your counter, and a yard that answers the phone.

Talk to the sales desk

Currently appointing in western Uttar Pradesh, Uttarakhand and Punjab.

A bright plywood showroom with display racks of panel samples in different wood tones — A Vriksha dealer showroom, Meerut.

Get the price list

Send your requirement — grade, thickness, quantity — and the sales desk replies with a price and dispatch time within one working day.

Phone+91 98130 47110

WhatsApp+91 98130 47110

Emailsales@vrishkaply.com

Yard and officePlot 14, Timber Market Road, Yamunanagar, Haryana 135001

HoursMonday to Saturday, 9:00–18:00 IST

Name

Phone

Product

City

Quantity, sheets

Anything we should know?

We reply from a real phone number, not a chatbot.